Laboratory/Field Test

Quality control measure is the primary criterion of any standard material.
The performance of a product will only be sustainable if its quality is properly controlled through conducting standard tests
in a well equipped laboratory. It is also ture in case of construction system
where huge amount of construction materials are used involving lot of investment. Housing and Building Research Institute has the
laboratories to facilitate all sort of standard tests according to the specification. A few of the available tests and their costs
are indicated below.
 
 
  Physical Tests Effective from MARCH 01, 2015
Sl. No. Name of Tests Unit
Rate in Taka (Excluding VAT)
A. AGGREGATES
1. Abrasion (L.A.) 1
4,000.00
2. Sieve analysis/F.M. of fine aggregate 1
1,500.00
3. Sieve analysis of coarse aggregate 1
2,500.00
4. Sp. gr. and absorption of coarse aggregate 1
2,500.00
5. Sp. gr. and absorption of fine aggregate 1
2,500.00
6. Total moisture content of aggregate 1
2,500.00
7. Relative density and absorption 1
2.500.00
8. Unit weight (bulk) of aggregate 1
1,500.00
9. Voids in aggregate 1
3,000.00
10. Materials finer than No. 200 sieve by Washing 1
2,000.00
11. Soundness 1
1,500.00
12. Clay lumps and friable particles in aggregate 1
2,300.00
13. Crushing strength of boulders. 1
3,000.00
14. Crushing value 1
3,000.00
15. Organic impurities in sand for concrete 1
2,000.00
16. Flakiness index 1
3,000.00
17. Elongation index 1
3,000.00
B. BRICK, TILES, REFRACTORIES ETC.
1. Crushing strength(Set of 5 Nos.) 1 Set
2,500.00
2. Absorption(Set of 5 Nos.) 1 Set
1,500.00
3. Size and Shape(Set of 5) 1 Set
2,000.00
4. Efflorescence (Set of 10 Nos.) 1 Set
2,500.00
5. Modulus of rupture(set of 5) 1 Set
2,500.00
C. CEMENT
1. Compressive Strength 1 Set
6,000.00
2. Tensile strength 1 Set
6,000.00
3. Setting time 1 Set
2,500.00
4. Normal consistency 1
2,000.00
5. Specific gravity 1
3,000.00
6. Specific surface 1
5,000.00
7. Autoclave expansion 1
12,000.00
8. Heat of hydration 1
6,000.00
9. Flexural strength of cement mortar 1
3,000.00
10. Fineness by the No. 100/200 sieve 1
2,000.00
D. CEMENT CONCRETE
1. Compressive strength of cylinder 3
1,500.00
2. Cylinder (casting & testing) 6
12,500.00
3. Compressive str. of cube 3
1,500.00
4. Cube (casting & testing) 6
12,500.00
5. Core Cutting & Testing without Scanning excluding field visit 1
5,000.00
6. Core Cutting & Testing with Scanning excluding field visit 1
10,000.00
7. Design of concrete mixes. without Admixture(/str.) 1
30,000.00
8. Design of concrete mixes. with Admixture(/str.) 1
40,000.00
9. Flexural Str. of beam (centre pt. loading) 1
Pl. Call
10. Flexural Str. of beam (third pt. loading) 1
Pl. Call
11. Impact Hammer Test without field visit 3 Spot
3,000.00
12. Unit weight, yield & air content 1
1,500.00
E. STEEL MATERIALS/M.S BAR
1. Tension & Elongation 3
1,750.00
2. Elongation (ductility) 3
1,750.00
3. Weight of M.S. Bar 3
1,000.00
4. Bend Test 3
900.00
5. Stress-strain curve (per curve) 1
6,000.00
 

Location

Housing and Building Research Institute
120/3, Darus-Salam, Mirpur
Dhaka-1216, Bangladesh
Tel +880-2-9035222
Fax +880-2-9035057

csgo depositsiz siteler

 

Contact Persons

Mohammad Abu Sadeque PEng.
Director
HBRI
Email: director@hbri.gov.bd
            hbribd@gmail.com
Phone: 02-9035222
           02-9000821